Description

Do you feel that the upper cabinet is not being fully utilized? Our product will change the traditional way of storing items. It uses a 2-tier pull-down design, combined with an internal assist device, allowing you to easily pull and push to complete the retrieval and placement. Choose us to make kitchen storage elegant and efficient from now on.

Key Features

Good Assistant:

This product is equipped with an assist device, and you can choose four different levels of force through the different arrangement and combination of the left and right buttons to adapt to items of different weights, achieving the effect of easily retracting or putting down this product with just a gentle push or pull. Even people with weaker bodies can easily use it.

Neat Storage:

The two-tier structural design allows you to place different items such as seasonings, ready-to-eat cereal, or other foods in different positions, making the cabinet look neater.

Improve Space Utilization:

You can install this product in a relatively high cabinet to fully utilize inaccessible space and increase space utilization.

Wide Space:

Each layer has a width of 9.8 inches and a gap of 10.1 inches between the two layers allowing you to place a large amount of seasoning, food, or alcohol.

Soft Handle:

The soft black sleeve is anti-slip and can provide you with a comfortable grip experience.

Raised Guardrails:

A 3.3-inch high guardrail can effectively prevent items placed on the product from falling off.

Application

This product can be used in kitchens, bars, cafes, cabinets, storage rooms, closets, dish racks, spice racks, and food storage racks, for storing snacks, bowls, plates, spice bottles, and more.

How to Install

1.Mark 10 holes of screws.
2.Align the product in the cabinet at both ends.
3.Screw the first 5 screws in the middle of the first one, then tighten the rest 5 screws.
4.Fix the cabinet door after fixing the product.
5.Check the working situation.

Specification

Material: Aluminum Alloy, Tempered Glass, High Carbon Steel
Process: Spray Molding
Color: White
Shape: Rectangular
Style: Modern
Assembly Requirement: No
Tier Spacing: 25.6cm/10.1in
Guardrail Height: 8.5cm/3.3in
Each Tier Width: 25cm/9.8in
Applicable Cabinet Side Board Thickness: 16-18mm/0.63-0.71in

Applicable Cabinet Size

Height: ≥56cm/22.05in
Length: 56.4-56.8cm/22.2-22.36in
Under Cabinet Space: ≥35cm/13.78in

Lift-up Door Cabinet

Door Open Angle: 45°
Width: ≥27cm/10.63in

Turn Open Door Cabinet

Width: ≥28cm/11.02in

Load Capacity

Empty: 0-1kg/0-2.2lbs
S1: 1-4kg/2.2-8.82lbs
S2: 3-6kg/6.61-13.23lbs
S3: 5-10kg/11.02-22.05lbs
Product Size: 56.4*26*54.5cm/22.2*10.2*21.5in
Package Size: 57*57*28cm/22.44*22.44*11.02in
Gross Weight: 15.6kg/34.39lbs
Net Weight: 13.8kg/30.42lbs

Package Included

1 * 2-tier Pull-down Shelf
1 * English Manual
Other Accessories for Installation

Notes

1.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2.The cabinet for installing this product needs to ensure that it has a certain load-bearing capacity.
3.If gear shifting is required, it must be done when the product is in its initial position (i.e. when it is not pulled out of the cabinet).
4.When the product is carrying a heavy load, the corresponding gear must be pressed (usually one gear higher than the actual weight). The product cannot be overloaded for use.
5.Please do not use the assist device when there are no or very few items on the storage rack, otherwise the product will bounce upwards and cause impact when returned, which may damage the product and its contents,
6.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.